This is a configuration page used to configure and set up the charging station’s WIFI connectivity.
1 –
The networkNetwork to which the charging station is currently connected to
is listed at the top of the page.
2 –
The Available network segment lists other networks that are available to the charging station but to which it is not connected toOther available networks.
3 –
IfChoose Add network manually connect to it manually if a network you are trying to connect to is not listed or if it is hidden
, you can choose Add network manually and connect to it manually.
4 –
By tappingTap Connect via WPS
, you canto connect to a network via WPS if your network router supports it.
A – Signal strength indicator 
B – Network name
C – Network status 
Connected 
Connection lost
D – Connection indicator
E – Network configuration and details
1 – Network name
2 – Network status
3 – Tap Disconnect network to disconnect from this network.
4 – By switching this toggle button, you can enable or disable DHCP (Dynamic IP) on this network.
5 – If DHCP is disabled, you can set your custom IP4 and IP6 settings.