Versions Compared
Key
- This line was added.
- This line was removed.
- Formatting was changed.
This is a configuration page used to configure and set up the charging station’s WIFI connectivity.
1 – The network to which the charging station is currently connected to is listed at the top of the page.
2 – Other The Available network segment lists other networks that are available to the charging station but to which it is not connected to are listed below.
3 – If a network you are trying to connect to is not listed or if it is hidden, you can choose Add network manually and connect to a network it manually.
4 – You By tapping Connect via WPS, you can connect to a network via WPS if your network router supports it.
A – Signal strength indicator
B – Network name
C – Network status Connected Connection lost
D – Connection indicator
E – Network configuration and details
1 – Network name
2 – Network status
3 – To Tap Disconnect network to disconnect from this network tap Disconnect network.
4 – You By switching this toggle button, you can enable or disable DHCP (Dynamic IP) on this network.
5 – You If DHCP is disabled, you can set your custom IP4 and IP6 settings if DHCP is disabled.