The housing of the main unit including the front cover and the back part of the module is made of self-extinguishing high-quality polycarbonate.
The default housing colour of the main unit module is light grey (RAL 7001). The colour of the module’s backplate is black (RAL 9005).
Front view
1 – User interface
2 – Front cover
3 – Screw point / Tamper-proof screw point
4 – Snap fit opening (top, bottom)
5 – Breakable plastic part covering the top/bottom entry point
Back view
1 – Snap fit opening (top, bottom)
2 – Breakable plastic part covering the top/bottom entry point
3 – Rubber gasket
4 – Inlet mating pins: Electrical inputs
5 – Contact springs: Auxiliary power supply, RS-485 communication
6 – Outlet mating pins: Electrical outputs
7 – Contact springs: Charging cable locking mechanism, Locking plug (for the Output socket module only), Proximity Pilot (PP), Control Pilot (CP)
Screws
The front cover is locked with a screw (by default) or with a tamper-proof screw (option).
Four screws are needed for assembling the main unit module with the output module.
Screw location
Purpose
Screw specification
Screw head type and size
Material
Number of screws
Torque [N m]
Housing
The screw fixes the front cover with the main unit module.
PT 4 x 16 mm
Torx T20
stainless steel
1
1
Housing
Tamper-proof screw fixes the front cover with the main unit module and prevents uncontrolled removal of the cover. *
PT 4 x 16 mm
Torx T20 with pin
stainless steel
1
1
Housing
Fixing the main unit module with the output module.
PT 4 x 16 mm
Torx T20
stainless steel
4
1.8